Ebonite Destiny Pearl Black/Red/Blue
The Ebonite Destiny Pearl was designed to produce length with a strong backend on medium to light oil. The Cyclone Torque core is surrounded by a GB 11.2 Pearl coverstock sanded down to a 1000 Grit Abralon finish and polished to create this reaction. This bowling ball offers a smashing value for your dollar!
- Color: Black/Red/Blue
All colors do vary somewhat from the picture shown - Core: Cyclone Torque
- Coverstock: GB 11.2 Pearl
- Finish: 500/1000 Abralon Polished w/Powerhouse Factory Finish Polish
- RG: 16#-2.52 15#-2.53 14#-2.54
- Differential: 16#-.047 15#-.053 14#-.053
- Reaction: Skid/Flip
- Recommended Lane Condition: Medium to Light Oil
- A few tiny pit holes in the cover stock of the ball are normal
- SKU: EBOMMDESBRB
- Product ID: 12090
- Brand: Ebonite
- Category: Bowling Balls
- Ball Performance: Mid Performance Balls
Customer Questions & Answers | Reviews
Question:
how is this ball drilled adn how do I know it will fit my hand
Have an answer to this question?
Question:
How does compare to the Hammer Deadly Aim
Have an answer to this question?
Answer:
This ball will be significantly lower hook potential than the Hammer Deadly Aim which was a high performance ball. The Deadly Aim was for medium to heavier oil and was a very strong ball in those conditions while the Destiny is designed to be strong but only in lighter oil and some medium conditions.
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
Question:
I have been bowling for a year. I don’t know ho to hook. I average around 125 and want to upgrade my ball. What do you recommend? I use a 10 pound ball.
Have an answer to this question?
Answer:
We have a great selection of entry performance balls that would be good for someone starting out and looking to learn how to hook the ball. The Destiny is considered mid performance but it would also be a good option because it still works in lighter oil and is not going to be too aggressive to start learning how to hook with.
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
Question:
Will u drill this ball large basic and how .much
Have an answer to this question?
Answer:
We did not have basic drilling offered for this ball unfortunately. We offer performance drilling which is custom fit so you would have to provide your measurements if you wanted us to drill this ball. If you are not sure about the measurements we would have to ship the ball to you without drilling and you could have it measured and drilled locally.
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
Question:
Can u get this ball drill just basic large and how much
Have an answer to this question?
Answer:
Unfortunately we cannot do the basic drilling for this ball. It has to be a performance drilling option to drill with us. You may could get a more basic drilling option if you were to have this drilled locally but you would have to check for pricing with your local proshop.
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
Question:
Can this ball be basically drill
Have an answer to this question?
Answer:
Unfortunately we cannot do the basic drilling for this ball. It has to be a performance drilling option to drill with us. You may could get a more basic drilling option if you were to have this drilled locally but you would have to check for pricing with your local proshop.
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
Question:
I was told to ask for pin replacement 1-2” or 2-3”. CN you tell me about this
Have an answer to this question?
Answer:
The pin placement will give you certain drilling layouts so perhaps you need to request for this pin placement so your driller can get a specific drilling layout that best suits you. To request for this you can enter the pin placement just below the weight selection box where it says "Click to request pin/top weight" .
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
